|
•HOW
TO APPLY CAR CANDY
•
Versatile-for outdoor or indoor use • Microwave &
dishwasher safe - use on mugs,
cups, glasses, luggage, tool and tackle boxes and other
smooth, solid surfaces.
|
|
1.
Clean area where Car Candy design will be applied by removing
all oil, grease and dirt. Then dry area thoroughly.
(Car Candy Design should be applied on surface that is 60°
to 80° F. If below 60° use hair dryer to warn surface
area. If above 80° place in the shade to cool.)
2. Using scissors, cut out around the desired design (see
picture #1) to separate it from the sheet. |
3.
Very Important: Turn
the design face down on a clean flat surface (clear side down).
Then slowly peel up the backing paper at a sharp angle (see
picture #2) making sure design stays on the plastic carrier
sheet.
4. then place the sticky side of the design on the exact area
you want it. Rub the clear plastic from the center outward
to the edges to smooth out any bubbles using your finger or
a credit card. |
|
|
5.
Now remove the clear carrier sheet by picking up one edge.
Slowly peel it off at a sharp angle (see picture #3) making
sure the design stays on the intended surface. |
Satisfaction
Guaranteed: when used as
directed. manufacturer’s liability is limited to replacement
of product or refund of purchase price upon return within
90 days with used or unused product and proof of purchase.
Made in the USA
Car Candy(TM) is produced under license of US Patent 4,581,088.
Copyright © 2001 Product Resultants, Inc.
Car Candy is a trademark of Product Resultants, Inc.
All other trademarks are property of their owners.
|
